រំលងទៅមាតិកា

Tape-out

ជំហានដែលការរចនាបន្ទះឈីបត្រូវបានបញ្ចប់ ហើយប្លង់សៀគ្វីចុងក្រោយត្រូវបានប្រគល់ទៅឱ្យរោងចក្រដែលផលិតវា។.

테이프아웃

ទិដ្ឋភាពទូទៅ

Tape-out is the moment when a semiconductor design is finished and the final circuit layout is handed over to a foundry. After this step, the circuit is hard to change, so the design has to be thoroughly checked first. You can think of it as the gate to actually starting to make the chip.

Chip development keeps getting more complex, and a single design error can cost a lot of time and money to remake. That is why checking before tape-out has become more important. Most of the work of building a prototype and testing its performance comes after this gate. New kinds of chips, such as quantum chips or AI chips, go through the same procedure.

របៀបដែលវាដំណើរការ

The design team draws the circuit. Then it runs checks such as logic verification, timing analysis and physical layout inspection to confirm that the design follows the manufacturing rules. The design files that pass these checks are sent to the foundry at the tape-out step.

Based on the design it receives, the foundry makes masks and starts the process of etching the circuit pattern onto a wafer in many layers. When prototypes come out, they are tested to see how they really work. If problems turn up, the design is sometimes fixed and sent out again for the next round.

កន្លែងដែលវាត្រូវបានប្រើប្រាស់

A company developing a new chip uses tape-out as the point where it formally declares the design complete and fixes the production schedule. Investors and the industry often look at whether this step has been reached when they judge how far chip development has come.

To tape out, you need the manufacturing design rules, the verification reports and the packaging method all ready. The prototype production schedule has to match the foundry's production slots, so it is important to plan ahead.

ដែនកំណត់ និងការយល់ខុស

Tape-out does not mean the chip is finished. Whether the prototype really works well, and whether mass production reaches a good yield, has to be checked separately afterward. People easily confuse this step with success in mass production.

After tape-out, fixing the design costs a lot and takes a long time. So rushing the checks can sometimes lead to big losses later. A design that has been handed over does not always become a chip you can use right away.

ឧទាហរណ៍ប្រចាំថ្ងៃ

Once you put a letter in an envelope and hand it to the post office, you can no longer change what it says. In the same way, once you hand the layout to the factory, the circuit is effectively fixed.

ហេតុអ្វីវាសំខាន់

If you know what comes before and after tape-out, you can read chip announcements more accurately. You can tell how far real production has come and how the schedule is likely to go.

tapeout

មើលវានៅលើ LastAI

Where this term came up

ប្រភព និងការអានបន្ថែម

Quantum Computing Report

គោលគំនិតពាក់ព័ន្ធ

ឧបករណ៍ពាក់កណ្តាលចម្លងវត្ថុធាតុដែលអាចចម្លងអគ្គិសនី ឬរារាំងវា។ បន្ទះឈីបតូចៗដែលធ្វើពីវាក៏ត្រូវបានគេហៅថាឧបករណ៍ពាក់កណ្តាលចម្លងផងដែរ។.Waferបន្ទះស៊ីលីកូនស្តើងនិងមូលដែលបន្ទះឈីបត្រូវបានបង្កើតឡើងនៅលើវា។ បន្ទះឈីបរាប់រយចេញមកពីបន្ទះតែមួយ។.ការវេចខ្ចប់កម្រិតខ្ពស់បច្ចេកវិទ្យាដែលជង់បន្ទះឈីបដែលបានបញ្ចប់ និងភ្ជាប់ពួកវាយ៉ាងជិតស្និទ្ធ ដើម្បីឱ្យពួកវាដំណើរការដូចបន្ទះឈីបតែមួយ.កុំព្យូទ័រកង់ទិចកុំព្យូទ័រប្រភេទថ្មីដែលប្រើរូបវិទ្យានៃវត្ថុតូចបំផុត (មេកានិកកង់ទិច) ដើម្បីគណនា.គោលគំនិតបន្ថែម 1DNS (ប្រព័ន្ធឈ្មោះដែន)ប្រព័ន្ធមូលដ្ឋាននៃអ៊ីនធឺណិតដែលបំប្លែងឈ្មោះដែន ដូចជាអាសយដ្ឋានបណ្តាញ ទៅជាអាសយដ្ឋាន IP ដែលកុំព្យូទ័រចូលទៅកាន់.PCIe (PCI Express)ស្តង់ដារតភ្ជាប់សៀរៀលលឿនដែលភ្ជាប់ផ្នែកផ្សេងៗដូចជា CPU, GPU និង SSD.

អ្នក